Solutions d'impressions numériques et sérigraphiques | 04.76.26.20.11 | Contactez-nous

Adhesive phosphorescent roll - Length 10m - Width 1,24m - Class D - 10h

    Adhesive phosphorescent roll - Length 10m - Width 1,24m - Class D - 10h
Attention : photo non contractuelle
Prix unitaire & dégressivité
1383.84 € HT (1,660.61) 1660.61

Choisissez votre support et format :

supports et formats disponibles :

Sélectionnez votre quantité :
Référence produit : BRPL1220X10D
- Fabrication française.

Description du produit

These adhesive vinyls feature a photoluminescent coating that absorbs natural or artificial light, then releases it once placed in total darkness. The light is emitted with gradually decreasing intensity over several hours. Recharging takes about 15 minutes under standard indoor lighting.

- Class C vinyl: luminance of 160 mcd/m² after 10 minutes and 20 mcd/m² after 1 hour, for a total glow time of 6 hours. Thickness 0.25 mm, master roll 1.24 m × 47.5 m or supplied in lengths of 5, 10 or 15 m.
- Class D vinyl: luminance of 260 mcd/m² after 10 minutes and 35 mcd/m² after 1 hour, for a total glow time of 10 hours. Thickness 0.25 mm, master roll 1.24 m × 47.5 m or supplied in lengths of 5, 10 or 15 m.

Both our ranges comply with the current French standards NF X 08-050-1 and NF X 08-050-2 for evacuation signage.

Which class should you choose?


- Class C: the standard for indoor evacuation in public buildings and workplaces.

- Class D: higher luminance and longer glow time, recommended for marine applications (IMO/SOLAS standards), tunnels and demanding industrial sites.

What are the applications?


- Evacuation route marking: floor markings, arrows, emergency exit pictograms.

- Safety signage: signs and panels for public buildings, workplaces and industrial sites.

Tips for printers


Ink acts as an optical mask and reduces the material's luminescent capacity. The denser and darker the ink, the more it blocks the glow: pure black blocks 100% of the emission, while a translucent tint reduces it by 50 to 70%. Leave areas unprinted and use the photoluminescent background as a knockout to make your messages and symbols stand out.

- Cutting vinyl: vinyl cutting plotter with a 60° blade and increased pressure, or guillotine cutter.

- Cutting PVC panels: digital flatbed cutter with oscillating knife or router bit, straight guillotine or workshop shear.

- Tool maintenance: as the mineral filler is abrasive, check the sharpness of your blades regularly.

On request and subject to a quote, we can print and contour-cut these photoluminescent materials.

Poids unitaire3.7 Kg

Demandez un devis en quelques clics !

1.
Recevez votre devis dans un délai de 24 heures!
2.
Remplissez votre panier des produits souhaités.
3.
Depuis le panier, cliquez sur "demande de devis".
4.
Renseigner vos informations et validez !

Autres produits de la catégorie

Bande magnétique phosphorescente - Longueur 10m - Larg
Retro-reflective magnetic strip - Length 1m - Width 8cm
Retro-reflective adhesive strip RA2 - Length 1m - Width
Retro-reflective Magnetic strip with safety hatching -
Retro-reflective adhesive strip with safety hatching -
Retro-reflective adhesive strip with safety hatching -