These hatched strips are magnetic, which means you can attach them to any ferrous surface: car bodywork, steel cladding, fire doors, metal cabinets, etc.
The use of safety markings is strictly regulated by the European standard ISO 7010. Yellow and black markings are used to draw attention to fixed obstacles or dangerous areas within the company, while red and white markings indicate fire-fighting equipment, prohibited access or temporary hazards.
Red and white stripes can also be used as vehicle markings. Construction trucks, road maintenance vehicles, winter service vehicles, and green space maintenance vehicles on the hard shoulder must be equipped with red and white retro-reflective markings.
This is also the case for vehicles with non-standard dimensions or loads exceeding 1 metre.
RA2 road-grade retro-reflection compliant with European standards
These magnetic strips are covered with a WHITE/RED or YELLOW/BLACK retro-reflective vinyl.
We use microprismatic retro-reflective vinyl with high light reflection performance. This RA2 class product complies with European standards for road signage.Manufactured in France
We manufacture the magnetic safety strips in our workshop in Sassenage, near Grenoble. We cover a 0.75 mm thick roll of magnetic rubber with retro-reflective hatched vinyl.
The safety strips are available in 14 m rolls or 1 m long strips. You can easily cut them with scissors or a cutter if you need a shorter length.
Choose the width of the magnetic safety strip - from 1 to 10 cm - and the type of hatching: Black-Yellow or Red-White.
We also have magnetic strips{Lien071}: these strips will diffuse light in the event of a power cut and can also be used for evacuation signage.
{Lien072}
We sell {Lien046}compatible with these magnetic strips on our website. We can also print safety strips on stickers on {Lien070}.
We also offer {Lien073} on which we can print the file of your choice, and can create fully customised magnets: {Lien040} if you need custom dimensions or a custom coating.Magnetic strength 65 g/cm² pull force
We use a flexible magnetic rubber with a thickness of 0.75 mm, which is powerful enough to magnetise any type of ferrous surface, even thin ones.
It offers a good compromise between flexibility and magnetic strength: you can easily magnetise this coloured magnetic strip on a non-flat surface.{PARAGRAPHE18}
