Neodymium magnetic bar for screwing, with continuous magnetisation. Two holes are pre-drilled at each end. Screws are not supplied with the bar.
This magnetic bar is powerful: we use neodymium magnets that we insert along the entire length of a hollow aluminium bar. The magnets are positioned on one side of the bar, so the magnetisation is stronger on one side than the other.
This magnetic bar can be used as a tool holder, but also as a means of hanging objects or banners.
This screw-on magnetic bar is slightly less powerful than the continuous double-sided magnetised bar, in which we use larger magnets.
Dimensions of the screw-on magnetic bar
Choose from 4 lengths: 12.5 cm, 25 cm, 50 cm or 1 m.
Height: 25 mm
Thickness: 10 mmAssembled in France
We cut the aluminium profiles to the dimensions of the bar and insert neodymium magnets. The ends of the aluminium magnetic bar are closed with resin caps. We add 2 holes at the ends so that the bar can be screwed to a wall.
The cutting and assembly are carried out in our workshop in Sassenage, near Grenoble. On request, we can produce neodymium magnetic bars of different lengths
{Lien050}for your customisable magnetic bar projects. Magnetic power of the continuous screw-on magnetic bar
Unlike many ferrite magnetic bars available on the market, we use neodymium magnets, which are extremely powerful in relation to their size.
These magnets are placed continuously along the entire length of the bar.
Neodymium magnets are made of an alloy of iron, boron and rare earth elements, which is currently the alloy offering the highest magnetic power.
Each magnet has a pull force of 5.2 kg and a slip resistance of approximately 0.5 kg. If you use this magnetic bar as a wall-mounted tool holder, the slip force is the reference value.
{Link026}
